Hat Number 1:
Materials: 1 4 oz skein taupe, yellow, tangerine; aluminum
crochet hook J
Gauge: 4 puff sts and 4 ch 2=3"; 5 rnds=3".
Top of Beret: Starting at center with taupe, ch 6. Join with
sl st to form ring. First rnd: ch 3, (yo hook, insert hook in
ring and pull up lp to 1/2") 3 times, yo hook & pull
through all lps on hook, ch 1 tightly (first puff st made), ch 2;
*(yo ook & insert hook in ring and pull up lp to 1/2") 4
times, yo hook and pull through all lps on hook, ch 1 tightly (puff
st made), ch 2. Repeat from * 4 times more, sl st in top of ch 3.
2nd rnd: Sl st to next ch 2 sp, (work first puff st in same
space, ch 2, work a puff st, ch 2, first corner made), * work
puff st in same sp, ch 2, work puff st in same sp, ch 2 (another
corner made). Repeat from * around 4 times more, sl st in top of
ch 3. 3rd rnd: Sl st to next ch 2 sp, work first corner in same
sp, work puff st in next sp, ch 2, *work corner in next sp, work
puff st in next sp, ch 2. Repeat from * around, join. Piece
should measure 4" in diameter. 4th rnd: Sl st to next ch 2
sp, work first corner (work puff st in next sp, ch 2) twice, *
work corner in next sp (work puff st in next sp, ch 2) twice.
Repeat from * around, join. Continue in same manner working
corners over corners and 1 more puff st and ch 2 in next sp
between corners on each rnd, work 2 more rnds taupe, 2 yellow,
and 1 tangerine. Break off.
Bottom of Beret: starting at lower edge with taupe, ch 48 to
measure about 20". Join with sl st to form ring. st rnd: ch
3, dc in each ch around, 48 dc, ch ch-3 as one dc, sl st. 2-4
rnds: Ch 3, dc in each dc around, join. 5nd rnd: attach taupe to
any dc at base of foundation. Work first puff st in same st, ch 2,
skip 1 dc, * puff st in base of next dc, ch 2, skip 1 dc. Repeat
from * around (24 puff sts), join. 6th rnd: Sl st in next ch 2
sp, work first corner, (puff st in next sp, ch 2) 3 times; * work
corner in next sp, (puff st in next sp, ch 2) 3 times. Repeat
from * around. Working corners over corners and 1 more puff st in
next sp and ch 2 between corners on each round, work 1 more rnd
taupe, 2 yellow, and 1 tangerine. Break off.
Joining: with wrong sides of top and bottom together and with
right side of top facing you and corners matching, work trhough
both thicknesses as follows: attach tangerine to any corner sp,
work first corner, (work puff st in next sp, ch 2) 8 times; *
work corner in next corner sp, (work puff st in next sp, ch 2) 8
times. Repeat from * around, join. Break off.
Hat No. 2.
Materials: 1 4 oz skein mid orange, crochet hook J
Gauge: 7 dc = 2"; 5 rnds =3".
Starting at top, ch 3. Join with a sl st to form ring. 1st rnd:
ch 3, work 11 dc in ring (12 dc, counting ch 3 as 1 dc). Do not
join rnds but mark beg of rnds. 2nd rnd: work 2 dc in each dc
around. Repeat 2nd rnd once. 4th rnd: Dc in each dc around. 5th
rnd: * work 2 dc in next dc, dc in next dc. Repeat from * around
(72 dc). Hat should measure 6" across. 6th rnd: Rep 4th rnd.
7th rnd: rep 5th rnd. 8th through 13th rnds: Rep 4th rnd 6 times
more. 14th rnd: *dc in next dc, dc in each of the next 2 dc
leaving last lp of each st on hook yo hook & draw through all
3 lps on hook (1 dc dec). Rep from * around (72 dc). 15th rnd:
Rep 4th rnd. 16th rnd: Rep 14th rnd. 17through 19th rnds: Rep 4th
rnd 3 times more. 20thn rnd: rep 4th rnd to last 5 sts, sc in
each of next 3 sts, sl st in each of next 2 sts. Break off.
Hat No. 3
Materials: Coats & Clark knitting worstened, 2 ounces each
rust No. 282 and medium gold No. 601; aluminum crochet hook size
J or size to give correct gauge
Gauge: 7 dc = 2"
Starting at top with rust, ch 4. Join with sl st to form ring.
1st rnd: ch 3, work 17 dc in ring (18 dc counting ch 3 as 1 dc),
sl st in top of ch 3. 2nd rnd: ch 1, sc in same place as last sl
st, * ch 5, sk 2 dc, sc in next dc. Rep from * around, ending sl
st. Attach gold. 3rd rnd: sl st in next lp, ch 3, work 6 dc in
same lp, *work 7 dc in next lp, rep from * around, attach rust. 4th
rnd: ch 1, yo hook twice, insert hook under next sc of 2nd rnd,
yo hook and draw up lp to height of 3rd rnd, (yo hook and draw
through 2 lps on hook) 3 times (long tr made), working through
back lps only, sc in each of next 6 dc, * work long tr; working
thorugh back lps only, sc in each of next 7 dc. Rep from *
around, sl st in first long tr. Piece should measure 4 1/2"
in diameter.
5th rnd: ch 1, sc in same place as sl st, *ch 5, sk 3 st, sc
in next st. Rep from * around, ending sl st. Attach gold 6th rnd:
Sl st in next lp, ch 3, work 5 dc in same lp, *work 6 dc in next
lp. Rep from * around, sl st in ch 3. Attach rust. 7th rnd: ch 1,
yo hook 3 times, insert hook from right to left under post of
long tr of 4th rnd, yo hook and draw up lp to height of 6th rnd,
(yo hook and draw through 2 lps) 4 times (long dtr made), ch 2,
work d tr under same tr, skip 1 st, working thorugh back lps
only, sc in each of next 10 sts, * d tr, ch 2, d tr, sk 2 sts,
working thorugh back lps only, sc in each of next 10 sts. Rep
from * around, sl st in ch 1.
8th rnd: ch 1, *yo hook, insert hook under post of first d tr,
yo hook and draw through 3 lps (h dc made), 3 sc in ch 2 lp, h dc
under next d tr, working in back lps only, sc in each of next 10
sc. Rep from * around. 9th rnd: (ch 5, sk 3 st, sc in next st)
twice; * ch 4, sk next 2 sts, sc in next st, (ch 5, sk next 3 st,
sc in next st) 3 times, rep from * around. 10th rnd: * ch 5, sc
in next lp, rep from * around. Rep last rnd 5 times.
16th rnd: * ch 2, sc in next lp, rep from * around. Break off
rust. 17th rnd: with gold, work sl st in any ch 2 sp, ch 3, work
2 dc in same lp, * 3 dc in next ch 2 lp. Attach rust. 18th rnd:
ch 1, *sc in each of next 3 dc, long dc around next sc of 16th
rnd. Rep around. Break off.
Hat No. 7
3 ounces medium brown, size J hook. Gauge: 7 dc = 2"; 5
dc rnds=3".
With brown only, work first through sixth rnds as for hat no.
34 (72 dc). 7th rnd: work a puff st in base of ch 3, * ch 3, sk
next 2 dc, sc in next dc, ch 2, skip next 2 dc, work a puff st in
next st. Rep around. 8th rnd: ch 3, work puff st in next sc, ch 3,
sc in top of next puff st, ch 2, rep around. 9th rnd: pull lp on
hook up to 1/2", work puff st in same sc, *ch 3, sc in next
puff st, ch 2, work puff st in next sc. Rep from * around. Rep
last 2 rnds 3 times more. 16th rnd: sl st in first sc, *work sc,
dc, and tr in next sp, tr in top of puff st, work tr, dc, and sc
in next sp, sl st in top of sc. Rep from * around. End off.
Hat No. 23
1 skein baby aqua, hook size J
Gauge: 9 sts (sc's and ch1's=2"; 9 rnds = 2".
Starting at lower edge, ch 60 to measure about 20". Join
with sl st to form ring, being careful not to twist ch. first rnd:
sc in each sc around. Do not join but mark beg of rnds. 2nd and 3rd
rnds: Working through back loops only, sc in each sc around. 4th
rnd: *ch 1, sc in next st, rep from * around. 5th rnd: *Sc in
next ch 1 sp, ch 1, repeat from * around. Repeat last rnd until
hat measures 5 1/2" from beg, sl st in next 3 sts, break
off, leaving 10" length of yarn.
Finishing: Mark 1st, 30th, 60th, and 90th sts of last rnd.
With yarn, tack securely all marked sts. Make 1 1/2" pompom
and sew to top of joining.
Hat No. 30
2 ounces each mauve and amethyst, 1 ounce mint julep, size J
hook
Gauge: 7 dc = 2 in; 5 rnds = 3 in.
With mauve, work first through 6th rnds as for hat 34. Hat
should measure 3 1/2 from center. Break off mauve, att mint. 7th
rnd: ch 3, 2 dc in next dc, dc in each of next 2 dc, insert hook
in dc in row below last dc worked & work a long dc, * dc in
next dc, 2 dc in next dc, dc in each of next 2 dc, work long dc.
rep from * around, join. 8th rnd: ch 3, dc in each dc around;
join. Break off mint, attach amethyst. 9th rnd:ch 3, dc in each
of next 4 dc, work long dc, * skip next dc, dc in each of next 5
dc, work long dc. rep from * around skip last dc. Rep 8th rnd 4
times. 14th through 20th rnds: working as for hat no. 34, rep 14th
through 20th rounds.
Hat No. 31
3 ounces nile green, size J hook
gauge: 7 dc = 2", 5 rnds = 3".
With green only, work 1-6th rnds as hat 34. 7th rnd: ch 3, dc
in each dc around, join. Rep last rnd until hat measures 7 1/2"
from center.
Edging: ch 3, work popcorn, * skip 3 dc, work a shell of 7 tr
in next dc, sk 3 dc, work popcorn in next dc, rep from * around.
Hat No. 34
Materials: Small amount dark gold, 1 ounce each scarlet,
cobalt blue, and black, 2 ounces white. Hook size J.
Gauge: 7 dc = 2"; 5 rnds =3".
Starting at top with gold, ch 3. Join with a sl st to form
ring. Ch 3, work 11 dc in ring (12 dc counting 3 ch as 1 dc),
join. 2nd round: ch 3, dc in base of ch 3, work2 dc in each dc
around (24 dc); join. 3rd rnd: Repeat 2nd rnd. Break off gold,
attach scarlet. 4th rnd: ch 3, dc in each dc around (48 dc). join.
5th rnd: ch 3, *2 dc in next dc, dc in next dc. Repeat from * to
last dc, 2 dc in last dc (72 dc), join. Hat should measure 6"
across. 6th rnd: Repeat 4th rnd. Break off scarlet, attach blue.
7th rnd: repeat 5th rnd (108 dc). Repeat 4th rnd twice. Break off
blue, attach black. Repeat 4th rnd 3 times more. Break off black,
attach white. Repeat 4th rnd once more. 14th rnd (dec rnd): ch 3,
*dc in each of next 2 dc leaving last lp of each st on hook, yo
& draw through all 3 lps on hook (1 dc dec); dc in next dc.
Repeat from * to last 2 sts, dec 1 dc (72 dc), join. Repeat 4th
round once more. 16th rnd: Repeat 14th rnd (48 dc). Repeat 4th
rnd 4 times more. Break off.
Hat No. 35
2 ounces bright pink, aluminum size hook J
Gauge: 7 dc=2"; 5 rnds=3".
With pink only, work first through sixth rnds as for hat no.
34. Hat should measure 3 1/2" from center. 7th rnd: Ch 3, dc
in next st, dc in st before ch 3 (this is last dc of last rnd -
first criss cross made); * skip next st of last rnd, dc in each
of next 2 st, dc in skipped st (criss cross made). Repeat from *
around, join. 8th rnd: ch 1, sc in each st around, join. 9th rnd:
sl st in next st, ch 3, dc in next st, dc in st before ch 3, *work
criss cross over next 3 sts. Repeat from * around, join. Repeat 8th
& 9th rnds 3 times more.
Edging: Ch 1, sc in each of next 2 dc, sc in sp between next 2
dc, ch 3, sl st in same sp. Repeat around, join, break off.